The materials needed to make the bead curtain are plastic beads, wooden slats, 2.5cm (1 inch) thick, electric drill, stapler, staples, unwaxed strong cord, screwdriver, and copper screws.

Its production steps are:

1. Before making curtains, choose the material, color, size and shape of the beads (lay a tablecloth on the work table to prevent the beads from rolling on the table). The string for the beads must be unwaxed to ensure that the beads are strong.

2. Measure the inner diameter of the door frame, and find a wooden slat to make the door curtain frame accordingly. Marking on the wooden slats, perforating, piercing the bead curtain, and the spacing of the holes should be determined according to the size of the beads and the sparseness of the curtain beads. Drill shallow holes in the wooden board, and use a stapler to punch the staples on the shallow holes so that the staples are exactly fixed on the surface of each hole.

3. Cut the cord, the length is twice the length of the doors and windows plus 5cm (2 inches). Pass the string through the center of the leading bead, and tie one end of the string around the bead and tie a knot at the eyelet of the bead.

4. Thread a needle on the other end of the thread leading one bead according to the picture, and start to thread the other beads. When you wear it, you can put on the beads in the order of the pattern you designed, leaving a distance of 5cm (2 inches) at the end of the string, and the leading bead string is ready. When making other bead strings, count the number of beads on each string. Each bead string must ensure the same number of beads and the same length.

5. Tie the beads. Pass the end of the bead string through the staples on the wooden slat hole and tie a dead knot. Adjust the length before tying the knot. The leading bead should be hung just below the wooden slat. After tying the remaining beads, place the wooden slats facing the house and fasten them to the door frame with screws.